序号  | 
论文题目  | 
发表年  | 
刊物名称  | 
1  | 
基于维氏压入理论模型的材料塑性参数与硬度一体化预测方法  | 
2022  | 
机械工程学报  | 
2  | 
开孔钢板耗能阻尼器受力性能试验研究  | 
2022  | 
建筑结构学报  | 
3  | 
起始点逐层等角度移动时3D打印混凝土圆管可连续打印高度  | 
2022  | 
建筑结构学报  | 
4  | 
端部嵌贴预应力碳纤维复材加固混凝土梁受力性能试验研究  | 
2022  | 
建筑结构学报  | 
5  | 
UHPC局压性能试验研究与承载力计算公式  | 
2022  | 
土木工程学报  | 
6  | 
UHPC梁带翼缘扭转特性及特征扭矩统一公式  | 
2022  | 
土木工程学报  | 
7  | 
UHPC键齿湿接缝直剪试验及湿接缝直剪承载力统一公式  | 
2022  | 
土木工程学报  | 
8  | 
配筋UHPC梁抗扭承载力可靠度分析及材料分项系数的确定  | 
2022  | 
土木工程学报  | 
9  | 
UHPC键齿胶接缝直剪性能试验研究  | 
2022  | 
土木工程学报  | 
10  | 
日照扁平钢箱梁二维温度场的解析解  | 
2022  | 
土木工程学报  | 
11  | 
传递最大推力的不平衡推力法  | 
2022  | 
岩土工程学报  | 
12  | 
基于荧光示踪法的含裂隙带红黏土边坡渗流特性研究  | 
2022  | 
中国公路学报  | 
13  | 
考虑缺陷位置和CFRP粘贴方式的钢板疲劳性能  | 
2022  | 
中国公路学报  | 
14  | 
降雨作用下裂隙红黏土边坡渗流特征与冲刷模式  | 
2022  | 
中国公路学报  | 
15  | 
基于FDM-DEM耦合的盾构开挖面前方土体三维位移特性研究  | 
2022  | 
中国公路学报  | 
16  | 
CFRP筋钢骨混凝土组合梁受弯性能  | 
2022  | 
中国公路学报  | 
17  | 
预应力NSM CFRP抗剪加固钢筋混凝土T梁试验  | 
2022  | 
中国公路学报  | 
18  | 
局部锈蚀下Q550E钢梁抗弯性能试验研究  | 
2022  | 
中国公路学报  | 
19  | 
考虑斜坡效应的地基水平抗力比例系数确定方法  | 
2022  | 
中国公路学报  | 
20  | 
梯度锚固预应力NSM CFRP板条加固梁破坏模式与影响因素试验研究  | 
2022  | 
中国公路学报  | 
21  | 
基于改进PF算法的锈蚀RC结构抗弯承载力预测方法  | 
2022  | 
工程力学  | 
22  | 
考虑腹板焊缝损伤的正六边形蜂窝梁变形性能与挠度计算研究  | 
2022  | 
工程力学  | 
23  | 
平钢板-UHPC 组合桥面板纵向抗负弯性能试验研究  | 
2022  | 
工程力学  | 
24  | 
承压型组合剪力键剪切性能试验与承载力计算  | 
2022  | 
工程力学  | 
25  | 
流线型箱梁涡振主动吹气流动控制及作用机理  | 
2022  | 
交通运输工程学报  | 
26  | 
双幅连续梁桥钢箱梁涡激振动机理分析  | 
2022  | 
振动与冲击  | 
27  | 
稳定板对带式输送机边主梁斜拉桥涡振性能影响机理的研究  | 
2022  | 
振动与冲击  | 
28  | 
酸腐蚀下粉砂质泥岩力学特性及细观机理研究  | 
2022  | 
地下空间与工程学报  | 
29  | 
固化与试验温度对环氧树脂及表层嵌贴CFRP-混凝土界面粘结性能的影响  | 
2022  | 
复合材料学报  | 
30  | 
橡胶-砂-聚氨酯复合材料冻融循环后强度特性及本构模型  | 
2022  | 
复合材料学报  | 
31  | 
圆形截面UHPC排水管受力性能及设计优化研究  | 
2022  | 
给水排水  | 
32  | 
镍铁渣–黏土–水泥改性土力学特性试验及修正的邓肯–张模型  | 
2022  | 
工程科学与技术  | 
33  | 
基于粒子群算法的单壁钢围堰加固施工优化  | 
2022  | 
公路交通科技  | 
34  | 
基于CR列式的平面体外预应力梁非线性有限元模型  | 
2022  | 
湖南大学学报(自然科学版)  | 
35  | 
开口断面桥梁颤振稳定性及优化措施机理研究  | 
2022  | 
湖南大学学报(自然科学版)  | 
36  | 
挑臂长度对钢桁梁颤振稳定性的影响  | 
2022  | 
湖南大学学报(自然科学版)  | 
37  | 
典型带挑臂钢箱主梁涡激力模型研究  | 
2022  | 
湖南大学学报(自然科学版)  | 
38  | 
钢桥面顶板焊缝处共线双裂纹耦合扩展特性分析  | 
2022  | 
湖南大学学报(自然科学版)  | 
39  | 
基于混合遗传算法的高速公路桥梁风屏障参数优化  | 
2022  | 
湖南大学学报(自然科学版)  | 
40  | 
干湿循环对炭质泥岩蠕变及损伤特性的影响  | 
2022  | 
湖南大学学报( 自然科学版)  | 
41  | 
梯度锚固预应力NSM CFRP加固RC梁静力及疲劳性能研究  | 
2022  | 
湖南大学学报(自然科学版)  | 
42  | 
龙卷风作用下大跨度桥梁车-轨-桥耦合振动及行车安全性  | 
2022  | 
湖南大学学报(自然科学版)  | 
43  | 
热风铜钎焊炉热处理后不锈钢力学性能试验研究  | 
2022  | 
湖南大学学报(自然科学版)  | 
44  | 
基于随机响应面法的斜坡基桩水平承载可靠性分析  | 
2022  | 
湖南大学学报(自然科学版)  | 
45  | 
斜坡段桥梁基桩受力与变形分析的传递矩阵法  | 
2022  | 
湖南大学学报(自然科学版)  | 
46  | 
基于裂纹扩展的锈蚀拉索疲劳寿命评估  | 
2022  | 
湖南大学学报(自然科学版)  | 
47  | 
溶洞高度影响嵌岩桩轴力传递及桩侧超载响应试验  | 
2022  | 
湖南大学学报(自然科学版)  | 
48  | 
负斜桩顶部水平受拉响应及p-y曲线特征试验研究  | 
2022  | 
湖南大学学报(自然科学版)  | 
49  | 
基于Connector单元的锈蚀RC梁界面粘结性能细观数值模拟  | 
2022  | 
吉林大学学报(工学版)  | 
50  | 
碱激发胶凝材料的碳化性能研究进展  | 
2022  | 
科技导报  | 
51  | 
非高斯风场作用下桥梁抖振响应研究  | 
2022  | 
空气动力学学报  | 
52  | 
基于吸气的流线型箱梁涡振主动流动控制试验研究  | 
2022  | 
桥梁建设  | 
53  | 
双幅钝体钢箱梁桥涡振性能气动优化风洞试验研究  | 
2022  | 
实验力学  | 
54  | 
富水粉砂地层深基坑底部注浆加固数值模拟分析  | 
2022  | 
水利水电科技进展  | 
55  | 
盾构隧道施工引起地层位移的复变函数修正解  | 
2022  | 
水资源与水工程学报  | 
56  | 
带输送机边主梁涡振性能及抑振措施试验研究  | 
2022  | 
西南交通大学学报  | 
57  | 
干湿循环作用下单裂隙炭质页岩能量演化与破坏特征研究  | 
2022  | 
岩土力学  | 
58  | 
基于主应力迹线分层的有限土体土压力计算  | 
2022  | 
岩土力学  | 
59  | 
钢管混凝土空间桁拱徐变计算的单一单元模型  | 
2022  | 
应用力学学报  | 
60  | 
预应力UHPC-NC组合梁结合面徐变剪应力分析  | 
2022  | 
应用力学学报  | 
61  | 
外立面形式对高层建筑表面风压影响研究  | 
2022  | 
应用力学学报  | 
62  | 
预制拼装综合管廊承插式接头扭转力学性能  | 
2022  | 
应用力学学报  | 
63  | 
变厚度各向异性功能梯度转动圆盘的弹性分析  | 
2022  | 
应用数学和力学  | 
64  | 
稳定板高度对桥面输送机边主梁斜拉桥涡振性能的影响机理  | 
2022  | 
长安大学学报(自然科学版)  | 
65  | 
加载速率对钢纤维与超高性能混凝土黏结性能的影响  | 
2022  | 
长安大学学报(自然科学版)  | 
66  | 
风屏障对平层公铁桥上列车气动特性影响的风洞试验研究  | 
2022  | 
振动工程学报  | 
67  | 
地铁车致隧道与土体振动的高效时-频混合预测方法  | 
2022  | 
振动工程学报  | 
68  | 
基于能量耗散原理的炭质泥岩崩解特征试验研究  | 
2021  | 
中南大学学报(自然科学版)  | 
69  | 
生物聚合物改良预崩解炭质泥岩水稳性及冲刷试验研究  | 
2022  | 
中南大学学报(自然科学版)  | 
70  | 
矿渣掺量对偏高岭土基地聚物孔溶液碱度和地质聚合行为的影响  | 
2021  | 
中南大学学报(自然科学版)  | 
71  | 
拉索失效和主梁损伤斜拉桥静力性能退化模型试验  | 
2022  | 
中南大学学报(自然科学版)  | 
72  | 
悬浮隧道子结构简化模型与动力响应分析  | 
2022  | 
中南大学学报(自然科学版)  | 
73  | 
路堤荷载下坡脚处不同排距斜直组合桩工程特性试验研究  | 
2022  | 
中南大学学报(自然科学版)  | 
74  | 
基于梁连续抗弯刚度与小波变换的结构损伤识别方法研究  | 
2021  | 
计算力学学报  | 
75  | 
近邻双孔隧道围岩联合压力拱试验与数值分析  | 
2022  | 
北京交通大学学报  | 
76  | 
纳米材料的装配式混凝土结构界面损伤监测试验研究  | 
2022  | 
传感器与微系统  | 
77  | 
纳米Al2O3协同水性环氧树脂对水泥基锚固注浆材料改性研究  | 
2022  | 
硅酸盐通报  | 
78  | 
基于ANSYS的地铁车站大体积混凝土侧墙裂纹机理分析  | 
2022  | 
湖南科技大学学报(自然科学版)  | 
79  | 
不对称V型斜跨钢箱拱桥索力优化及控制  | 
2022  | 
湖南科技大学学报(自然科学版)  | 
80  | 
双掺粉煤灰和粉状高炉矿渣的自密实混凝土流变性能的研究  | 
2022  | 
混凝土  | 
81  | 
基于压电陶瓷的法兰与混凝土连接中高强螺栓松动损伤监测试验研究  | 
2022  | 
建筑结构  | 
82  | 
某Z字形连廊结构抗连续倒塌性能评估  | 
2022  | 
建筑结构  | 
83  | 
某混凝土弧形梁结构考虑楼板约束的受力性能研究  | 
2022  | 
建筑结构  | 
84  | 
外挂墙板限位支承合理螺栓预紧力研究  | 
2022  | 
建筑结构  | 
85  | 
掺建筑垃圾的可泵性回填土施工性能试验研究  | 
2022  | 
山东农业大学学报(自然科学版)  | 
86  | 
C80钢纤维混凝土拱圈温度试验分析  | 
2022  | 
沈阳工业大学学报  | 
87  | 
大型电气设备瓷套管地震易损性分析  | 
2022  | 
世界地震工程  | 
88  | 
基于非线性破坏准则的地下连续墙槽壁稳定性能耗分析方法研究  | 
2022  | 
铁道科学与工程学报  | 
89  | 
基于替代模型的缆索承重桥梁固有频率预测  | 
2022  | 
铁道科学与工程学报  | 
90  | 
粉砂质泥岩蠕变特性与非线性黏弹塑性本构模型  | 
2022  | 
土木与环境工程学报(中英文)  | 
91  | 
下弦与撑杆新构型张弦梁结构的抗连续倒塌性能  | 
2022  | 
土木与环境工程学报(中英文)  | 
92  | 
Q550E高强钢及焊接接头的疲劳裂纹扩展研究  | 
2022  | 
土木与环境工程学报(中英文)  | 
93  | 
开裂混凝土中氯离子等效扩散系数计算方法  | 
2022  | 
土木与环境工程学报(中英文)  | 
94  | 
碱激发偏高岭土-矿渣对氯离子的固化能力及其影响因素  | 
2022  | 
西安建筑科技大学学报(自然科学版)  | 
95  | 
双C型冷弯薄壁复合墙板系统抗火性能研究  | 
2022  | 
消防科学与技术  | 
96  | 
基于压电陶瓷的法兰连接中高强螺栓松动 损伤监测试验研究  | 
2022  | 
中外公路  | 
97  | 
大跨度独塔混合梁斜拉桥主梁纵漂影响分析  | 
2022  | 
中外公路  | 
98  | 
大跨度钢混组合梁斜拉桥钢主梁截面参数对成桥状态主梁受力敏感性分析  | 
2022  | 
中外公路  | 
99  | 
 PPC斜拉桥模型疲劳试验及塑性损伤分析  | 
2022  | 
中外公路  | 
100  | 
基于声发射和卷积神经网络的混凝土桥梁 损伤预测研究  | 
2022  | 
中外公路  | 
101  | 
基于突变理论的岩溶隧道填充物溶腔底板失稳数值分析  | 
2022  | 
中外公路  | 
102  | 
混合式组合梁斜拉桥参数分析与施工控制  | 
2022  | 
中外公路  | 
103  | 
角钢塔典型节点受力性能有限元分析  | 
2022  | 
问鼎在线学报(自然科学版)  | 
104  | 
不对称转体斜拉桥球铰应力分析及不平衡力矩计算  | 
2022  | 
问鼎在线学报(自然科学版)  | 
105  | 
基于改进条件概率法的服役结构可靠性研究  | 
2022  | 
问鼎在线学报(自然科学版)  | 
106  | 
地聚物再生混凝土粗骨料的优化设计  | 
2022  | 
交通科学与工程  | 
107  | 
不同土层参数对砖石排水拱涵受力影响  | 
2022  | 
交通科学与工程  | 
108  | 
风屏障对桥梁及列车的气动特性影响研究  | 
2022  | 
交通科学与工程  | 
109  | 
基于子结构法的结构行为一致多尺度建模方法研究  | 
2022  | 
交通科学与工程  | 
110  | 
基于Hoek-Brown准则岩溶区地下硐室开挖跨度研究  | 
2022  | 
交通科学与工程  | 
111  | 
盾构参数对复合地层损失率和地表沉降的影响  | 
2022  | 
交通科学与工程  | 
112  | 
既有桥桩对盾构引起地表沉降槽的变形影响  | 
2022  | 
交通科学与工程  | 
113  | 
湿热对胶黏剂及CFRP-钢接头力学性能的影响  | 
2022  | 
交通科学与工程  | 
114  | 
钢-UHPC桥面板湿接缝负弯矩试验研究  | 
2022  | 
交通科学与工程  | 
115  | 
混杂纤维超高性能混凝土断裂性能研究  | 
2022  | 
交通科学与工程  | 
116  | 
含水空洞的探地雷达正演模拟与试验研究  | 
2022  | 
交通科学与工程  | 
117  | 
基于位移反演的隧道初期支护可靠度分析  | 
2022  | 
交通科学与工程  | 
118  | 
CFRP板加固混凝土结构不同方法的黏结性能比较  | 
2022  | 
交通科学与工程  | 
119  | 
基于三维激光扫描的吊索钢丝锈蚀形貌分析  | 
2022  | 
交通科学与工程  | 
120  | 
混凝土相场断裂模拟——影响裂纹宽度的因素  | 
2022  | 
交通科学与工程  | 
121  | 
矿渣-偏高岭土地聚物抗压强度影响因素研究  | 
2022  | 
交通科学与工程  | 
122  | 
索损伤对非对称独塔斜拉桥动力特性的影响  | 
2022  | 
交通科学与工程  | 
123  | 
浅埋小净距隧道围岩压力的极限分析  | 
2022  | 
交通科学与工程  | 
124  | 
大跨悬拼钢筋混凝土拱桥施工索力计算分析  | 
2022  | 
交通科学与工程  | 
125  | 
弹性网络正则化移动荷载识别试验研究  | 
2022  | 
交通科学与工程  | 
126  | 
圆形地连墙空间效应影响因素分析  | 
2022  | 
交通科学与工程  | 
127  | 
碳纤维加固二次受力混凝土梁理论计算方法  | 
2022  | 
交通科学与工程  | 
128  | 
玄武岩地聚物砂浆的碱硅反应  | 
2022  | 
交通科学与工程  | 
129  | 
碳纤维布加固具多裂纹RC梁振动分析  | 
2022  | 
公路与汽运  | 
130  | 
悬索桥主梁施工过程设铰数量对结构体系的影响分析  | 
2022  | 
公路与汽运  | 
131  | 
不对称独塔叠合梁塔梁同步施工可行性与影响因素分析  | 
2022  | 
公路与汽运  | 
132  | 
不对称独塔叠合梁斜拉桥塔梁同步施工可行性与影响因素分析  | 
2022  | 
公路与汽运  | 
133  | 
百喜草根系对土壤渗透性能的影响  | 
2022  | 
公路与汽运  | 
134  | 
基于传递矩阵法的变截面梁自振特性分析  | 
2022  | 
公路与汽运  | 
135  | 
BIM与ABAQUS模型一体化分析应用研究  | 
2022  | 
公路与汽运  | 
136  | 
镍铁渣-黏土改性土承载特性试验研究  | 
2022  | 
公路与汽运  | 
137  | 
干溶洞对大坝对到围岩受力性状的影响分析  | 
2022  | 
公路与汽运  | 
138  | 
交通荷载对底部隐伏溶洞的动力响应分析  | 
2022  | 
公路与汽运  | 
139  | 
六月田隧道岩溶坍塌地段洞内管棚支护稳定性分析  | 
2022  | 
公路与汽运  | 
140  | 
混合梁斜拉桥A形索塔施工方案比选与优化  | 
2022  | 
公路与汽运  | 
141  | 
大跨径轻型石砌肋板拱桥加固技术研究  | 
2022  | 
公路与汽运  | 
142  | 
以提升创新能力为目标的基础力学实践教学初探  | 
2022  | 
力学与实践  | 
143  | 
“双主体”背景下研究生导师考核评价长效机制与体系研究  | 
2022  | 
科教导刊  | 
144  | 
基于“双主体”理念的教学方法与工作模式  | 
2022  | 
科教导刊  | 
145  | 
Nonlinear Modeling   Parameters and Acceptance Criteria for Interior Slab-Column Connections  | 
2022  | 
ACI Structural Journal  | 
146  | 
Novel cooling–solidification   annealing reconstruction of rock models  | 
2022  | 
Acta Geotechnica  | 
147  | 
The Influence of Rainfall   and Evaporization Wetting-Drying Cycles on the Slope Stability  | 
2022  | 
Advances in Meteorology  | 
148  | 
Nonlinear dynamic analysis   of galloping of a single iced conductor with four degrees of freedom based on   curved beam theory  | 
2022  | 
Advances in Structural   Engineering  | 
149  | 
Dynamic responses of the   rail vehicle-bridge coupling system considering the spanwise correlation   functions in vehicle aerodynamic forces  | 
2022  | 
Advances in Structural   Engineering  | 
150  | 
An Analysis Model Accounting   for Time-dependent Shear Lag Effects in Assembled Composite Bridge Decks  | 
2022  | 
Advances in Structural   Engineering  | 
151  | 
Vibration analysis of the   continuous beam bridge considering the action of jump impacting  | 
2022  | 
Advances in Structural   Engineering  | 
152  | 
Effects of local thickness   defects on the buckling of micro-beam  | 
2022  | 
Applied Mathematics and   Mechanics  | 
153  | 
Study on the restraint   effect of isolation pile on surface settlement trough induced by shield   tunnelling  | 
2022  | 
Applied Sciences  | 
154  | 
Research on the Method of   Temporary Prestressing to Regulate the Stress in the Section during the   Construction of the Main Arch Ring of the Cantilever Cast Arch Bridge  | 
2022  | 
Applied Sciences  | 
155  | 
 Geometric Nonlinear   Analysis of the Catenary Cable Element Based on UPFs of ANSYS  | 
2022  | 
Applied Sciences  | 
156  | 
Study of Secondary Effects   of Fatigue Cracks in Cross Partitions of Steel Plate Reinforced Steel Box   Girders  | 
2022  | 
Applied Sciences  | 
157  | 
Analytical Research on the   Impact Test of Light Steel Keel and Lightweight Concrete of Composite Wall  | 
2022  | 
APPLIED SCIENCES - BASEL  | 
158  | 
Development of Daily and   Extreme Temperature Estimation Model for Building Structures Based on Raw   Meteorological Data  | 
2022  | 
APPLIED SCIENCES - BASEL  | 
159  | 
A short-term wind speed prediction method utilizing novel hybrid deep learning algorithms to correct numerical weather forecasting  | 
2022  | 
Applied Energy  | 
160  | 
Disintegration Mechanism and   Swelling-Consolidation Characteristics of Saturated Disintegrated   Carbonaceous Mudstone  | 
2022  | 
Arabian Journal for Science   and Engineering  | 
161  | 
Visualization experiments   and seepage characteristics of water–solid mixture flow through a rough   fracture of silty mudstone under low hydraulic head  | 
2022  | 
Arabian Journal of   Geosciences  | 
162  | 
Generalized foundation   Timoshenko beam and its calculating methods  | 
2022  | 
Archive of Applied Mechanics  | 
163  | 
 Multi-Scale Numerical Assessments of Urban   Wind Resource Using Coupled WRF-BEP and RANS Simulation: A Case Study  | 
2022  | 
Atmosphere  | 
164  | 
Predicting roof-surface wind   pressure induced by conical vortex using a BP neural network combined with   POD  | 
2022  | 
Building simulation  | 
165  | 
Theoretical model and its   experimental verification on nonlinear flow through a rough fracture of silty   mudstone under low water head  | 
2022  | 
Bulletin of Engineering   Geology and the Environment  | 
166  | 
Use of sodium alginate as a   novel cementitious material to improve the engineering properties of   disintegrated carbonaceous mudstone  | 
2022  | 
Bulletin of Engineering   Geology and the Environment  | 
167  | 
Drying Shrinkage Performance   of Medium-Ca Alkali-Activated Fly Ash and Slag Pastes  | 
2022  | 
Cement and Concrete   Composites  | 
168  | 
Experimental investigation   on torsional behaviors of ultra-high-performance fiber-reinforced concrete   hollow beams  | 
2022  | 
Cement and Concrete   Composites  | 
169  | 
Characteristics of Vibration   Waves Measured in Concrete Lining of Excavated Tunnel during Blasting in   Adjacent Tunnel  | 
2022  | 
COATINGS  | 
170  | 
Safety helmet wearing   detection in aerial images using improved yolov4  | 
2022  | 
Computers, Materials &   Continua  | 
171  | 
Wall cracks detection in   aerial images using improved mask r-cnn  | 
2022  | 
Computers, Materials &   Continua  | 
172  | 
bridge crack segmentation method based on parallel   attention mechanism and multi-scale features fusion  | 
2022  | 
Computers, Materials &   Continua  | 
173  | 
The use of eco-friendly   lignin as a cementitious material to improve the engineering properties of   disintegrated carbonaceous mudstone  | 
2022  | 
Construction and Building   Materials  | 
174  | 
Enhanced effect of   self-propagating subsequent heating on the expansive pressure on soundless   chemical demolition agent  | 
2022  | 
Construction and Building   Materials  | 
175  | 
A new method for measuring   the relative dielectric constant of porous mixed media using GPR, and its   application  | 
2022  | 
Construction and Building   Materials  | 
176  | 
Fatigue life assessment of   high-strength steel wires: Beach marks test and numerical investigation  | 
2022  | 
Construction and Building   Materials  | 
177  | 
Experimental investigation   on bond performance of helically ribbed GFRP rebar embedded in Ultra-high   performance concrete  | 
2022  | 
Construction and Building   Materials  | 
178  | 
Size effect and   geometrically nonlinear effect on thermal post-buckling of micro-beams: a new   theoretical analysis  | 
2022  | 
Continuum Mechanics and   Thermodynamics  | 
179  | 
A short-term wind speed interval prediction method based on WRF simulation and multivariate line regression for deep learning algorithms  | 
2022  | 
Energy Conversion and Management  | 
180  | 
Behaviour of the lockbolt   demountable shear connector under combined shear and tension loading  | 
2022  | 
Engineering Failure Analysis  | 
181  | 
Case study on floor heave   failure of highway tunnels in gently inclined coal seam  | 
2022  | 
Engineering Failure Analysis  | 
182  | 
A detection method   integrating modal deflection curvature difference and natural frequency for   structural stiffness degradation  | 
2022  | 
Engineering Failure Analysis  | 
183  | 
Structural fatigue   reliability evaluation based on probability analysis of the number of   zero-crossings of stochastic response process  | 
2022  | 
Engineering Failure Analysis  | 
184  | 
Failure mechanisms and   loading capacity prediction for rectangular UHPC beams under pure   torsion   | 
2022  | 
Engineering Structures  | 
185  | 
Modified softened membrane   model for ultra-high-performance fiber-reinforced concrete solid and hollow   beams under pure torsion  | 
2022  | 
Engineering Structures  | 
186  | 
Flexural behavior of RC   beams strengthened with fully or partially prestressed near-surface mounted   FRP strips: An experimental investigation  | 
2022  | 
Engineering Structures  | 
187  | 
Nonlinear model for   nonprestressed and prestressed slab-column connections under lateral load   effects  | 
2022  | 
Engineering Structures  | 
188  | 
Study on the calculation   method of active earth pressure and critical width for finite soil behind the   retaining wall  | 
2022  | 
Frontiers in Earth Science  | 
189  | 
Secondary transfer length   and residual prestress of fractured strand in post-tensioned concrete beams  | 
2022  | 
Frontiers of Structural and   Civil Engineering  | 
190  | 
Plastic Deformation   Characteristics of Disintegrated Carbonaceous Mudstone under Dynamic Loading.  | 
2022  | 
Geomechanics and Engineering  | 
191  | 
Numerical study of rock   mechanical and fracture property based on CT images  | 
2022  | 
Geomechanics and Engineering  | 
192  | 
Fine grid model for the   dielectric characteristics of ground-penetrating radar in mixed media  | 
2022  | 
Geophysical Prospecting  | 
193  | 
 Laboratory evaluation of different   geosynthetics for water drainage  | 
2022  | 
Geosynthetics International  | 
194  | 
Corrosion fatigue crack   growth prediction of bridge suspender wires using Bayesian gaussian process  | 
2022  | 
International Journal of   Fatigue  | 
195  | 
Running Safety Assessment of   a Train Traversing a Long-Span Bridge Under Sudden Changes in Wind Loads   Owing to Damaged Wind Barriers  | 
2022  | 
International Journal of   Structural Stability and Dynamics  | 
196  | 
SHEAR LAG EFFECT STUDY OF A   COMPOSITE GIRDER CABLE-STAYED BRIDGE DURING CONSTRUCTION  | 
2022  | 
International Journal of   Simulation Modelling  | 
197  | 
Vortex-induced force model   and reliability analysis of a steel box girder with projecting slab in a   cable-stayed bridge  | 
2022  | 
International Journal of   Structural Stability and Dynamics  | 
198  | 
A Symplectic Analytical   Approach for Torsional Buckling of Cylindrical Shells with Asymmetric Local   Defects  | 
2022  | 
International Journal of   Structural Stability and Dynamics  | 
199  | 
Calculation of the   permittivity of inhomogeneous media based on the TEDAWT method  | 
2022  | 
Journal of Applied   Geophysics  | 
200  | 
Equivalent Plane Algorithm   for Static Analysis of Cable-stayed Bridge with Spatial Cables  | 
2022  | 
Journal of Bridge   Engineering  | 
201  | 
Direct Shear Strength of   UHPC Large-Keyed Epoxy Joint: Theoretical Model and Experimental Verification  | 
2022  | 
Journal of Bridge   Engineering  | 
202  | 
Characterizing wind pressure   on CAARC standard tall building with various facade appurtenances  | 
2022  | 
Journal of Building   Engineering  | 
203  | 
Prediction of wind pressures   on tall buildings using wavelet neural network  | 
2022  | 
Journal of Building   Engineering  | 
204  | 
Effect of Activator   Properties on Drying Shrinkage of Alkali-Activated Fly Ash and Slag  | 
2022  | 
Journal of Building   Engineering  | 
205  | 
Effects of sudden change in   wind loads on running performance of trains on a highway-railway one-story   bridge in crosswinds  | 
2022  | 
Journal of Central South   University  | 
206  | 
Numerical study on optimal   structural parameters of train wind barrier based on orthogonal design  | 
2022  | 
Journal of Central South   University  | 
207  | 
Three-dimensional   displacement characteristics of adjacent pile induced by shield tunneling   under the influence of multiple factors  | 
2022  | 
Journal of Central South   University  | 
208  | 
Novel dynamic test system   for simulating high-speed train moving on bridge under earthquake excitation  | 
2022  | 
Journal of Central South   University  | 
209  | 
A novel combined   dual-conical indentation model for determining plastic properties of metallic   materials  | 
2022  | 
Journal of Materials   Research and Technology  | 
210  | 
Standard Pushout Tests and   Design Rules for a Bolted-Welded Hybrid Demountable Shear Connector  | 
2022  | 
Journal of Structural   Engineering  | 
211  | 
Reliability Evaluation of RC   Columns with Wind-Dominated Combination Considering Random Biaxial   Eccentricity  | 
2022  | 
Journal of Structural   Engineering  | 
212  | 
Research on the Free   Vibration of the Arch Bridge During Cable Hoisting or Rotation Erection Using   an Analytical Modeling  | 
2022  | 
Journal of Vibration   Engineering & Technologies   | 
213  | 
3D coupled wind-induced   inelastic response of base-isolated tall buildings with eccentricity and   biaxial interaction of hysteretic restoring base forces  | 
2022  | 
Journal of Wind Engineering   and Industrial Aerodynamics  | 
214  | 
Global reliability analysis   of running safety of a train traversing a bridge under crosswinds  | 
2022  | 
Journal of Wind Engineering   and Industrial Aerodynamics  | 
215  | 
Three-dimensional Stability   Analysis of Slurry Trench Based on Mohr-Coulomb Nonlinear Failure Criterion  | 
2022  | 
KSCE Journal of Civil   Engineering  | 
216  | 
Evolution of the Transient   Saturated Zone and Stability Analysis of Slopes under Rainfall Conditions  | 
2022  | 
KSCE Journal of Civil   Engineering  | 
217  | 
Study on Static and Dynamic   Reliability of Main Girder of Cable-stayed Bridge Based on Subset Simulation   Method  | 
2022  | 
KSCE Journal of Civil   Engineering  | 
218  | 
Failure Mechanism of the Bearing Stratum at the End of a Pile Induced by Shield Tunnel Excavation Beneath a Piled Building  | 
2022  | 
KSCE Journal of Civil Engineering  | 
219  | 
Effect of NaCl solution and   simulated concrete pore solution environment on the efficiency of steel bar   energized corrosion  | 
2022  | 
materials  | 
220  | 
Experimental Study on the   Interrelationship between the Moisture Content and Drying Shrinkage of   Autoclaved Aerated Concrete Wallboard  | 
2022  | 
materials  | 
221  | 
Effect of Stray Current on   Corrosion and Calcium Ion Corrosion of Concrete Reinforcement  | 
2022  | 
materials  | 
222  | 
A unified sharp indentation   method for obtaining stress-strain relations, strength and Vickers hardness   of ductile metallic materials  | 
2022  | 
Materials Today   Communications  | 
223  | 
Real-time simultaneous   input-state-parameter estimation with modulated colored noise excitation  | 
2022  | 
Mechanical Systems and   Signal Processing  | 
224  | 
Physics-guided deep neural   network for structural damage identification  | 
2022  | 
Ocean Engineering  | 
225  | 
Enhancement of Mechanical   and Bond Properties of Epoxy Adhesives Modified by SiO2 Nanoparticles with   Active Groups   | 
2022  | 
Polymers  | 
226  | 
Effect of Polycarboxylic   Acid with Three Polar Groups of the Composite Grinding Aid on Cement   Chemistry and Properties  | 
2022  | 
Polymers  | 
227  | 
Probabilistic reconstruction   for spatiotemporal sensor data integrated with Gaussian process regression  | 
2022  | 
Probabilistic Engineering   Mechanics  | 
228  | 
Efficient time–frequency   approach for prediction of subway train-induced tunnel and ground vibrations  | 
2022  | 
Proceedings of the   Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid   Transit  | 
229  | 
A Wiener degradation process   with drift-based approach of determining target reliability index of concrete   structures  | 
2022  | 
Quality & Reliability   Engineering International  | 
230  | 
Experimental Study on the   Effect of Coexistence of Clay and Silt on the Dynamic Liquefaction of Sand  | 
2022  | 
Springer Nature  | 
231  | 
Topology optimization of   frame structures with stress and stability constraints  | 
2022  | 
Structural and   Multidisciplinary Optimization  | 
232  | 
Sensor fault detection,   localization, and reconstruction for online structural identification  | 
2022  | 
Structural Control and   Health Monitoring  | 
233  | 
Ring simulation: a novel   simple and efficient simulation method for structural reliability analysis  | 
2022  | 
Structural Safety  | 
234  | 
Probabilistic analysis of   resistance for RC columns with wind-dominated combination considering random   biaxial eccentricity  | 
2022  | 
Structure and Infrastructure   Engineering  | 
235  | 
Structural performance   degradation of cable-stayed bridges subjected to cable damage: model test and   theoretical prediction  | 
2022  | 
Structure and Infrastructure   Engineering  | 
236  | 
PDEM-based stochastic   analysis of a train-track-bridge system using dimension-reduced simulations   of turbulent winds and track irregularities  | 
2022  | 
Structure and Infrastructure   Engineering  | 
237  | 
Damage simulation and   strengthening of main girder after the fire-induced fracture of stay cables   during construction  | 
2022  | 
Structures  | 
238  | 
Behaviour and design of the   ‘lockbolt’ demountable shear connector for sustainable steel-concrete   structures  | 
2022  | 
Structures  | 
239  | 
Horizontal pushout tests and   parametric analyses of a locking-bolt demountable shear connector  | 
2022  | 
Structures  | 
240  | 
Fatigue life prediction for   prestressed concrete beams under corrosion deterioration process  | 
2022  | 
Structures  | 
241  | 
Direct shear performance of   UHPC Multi-Keyed epoxy joint  | 
2022  | 
Structures  | 
242  | 
Prefabricated prestressed   variable truss to strengthen RC beams based on the concept of geometrically   unstable system  | 
2022  | 
Structures  | 
243  | 
Quantification of   non-uniform mechanical interlock and rotation in modelling bond-slip between   strand and concrete  | 
2022  | 
Structures  | 
244  | 
Damage features extraction   of prestressed near-surface mounted CFRP beams based on tunable Q-factor   wavelet transform and improved variational modal decomposition  | 
2022  | 
Structures  | 
245  | 
The Face Stability Analysis   of Shield Tunnels Subjected to Seepage Based on the Variational Principle  | 
2022  | 
Sustainability  | 
246  | 
Modified couple stress-based   nonlinear static bending and transient responses of size-dependent sandwich   microplates with graphene nanocomposite and porous layers   | 
2022  | 
Thin-Walled Structures  | 
247  | 
Study on mechanical   properties and energy characteristics of carbonaceous shale with different   fissure angles under dry–wet cycles  | 
2022  | 
Bulletin of Engineering   Geology and the Environment  | 
248  | 
Passive Earth Pressure on   the Retaining Wall of Limited-width Backfill Based on Curvilinearly Layered  | 
2022  | 
KSCE Journal of Civil   Engineering  | 
249  | 
Active Earth Pressure for   Sloping Finite Soil While Accounting for Shear Stress and Curved Slip Surface  | 
2022  | 
Geofluids  | 
250  | 
Inclined Layer Method-Based   Theoretical Calculation of Active Earth Pressure of a Finite-Width Soil for a   Rotating-Base Retaining Wall  | 
2022  | 
Sustainability  | 
251  | 
Calculation of Active Earth   Pressure on the Retaining Wall with Limited-width Soil under a Curved Slip   Failure Surface  | 
2022  | 
Engineering Letters  | 
252  | 
Calculation of Nonlimit   Active Earth Pressure against Rigid Retaining Wall Rotating about Base  | 
2022  | 
Applied Sciences  | 
253  | 
Calculation of the   nonlimiting pressure of the finite soil behind a retaining wall based on the   curved sliding surface  | 
2022  | 
DYNA  | 
254  | 
Mechanism, Characterization   and Factors of Reaction between Basalt and Alkali: Exploratory Investigation   for Potential Application in Geopolymer Concrete  | 
2022  | 
Cement and Concrete   Composites  | 
255  | 
Metakaolin-Based Geopolymer   Features Different Pore Structure Characteristics from Ordinary Portland   Cement Paste: A Mechanistic Study  | 
2022  | 
Journal of Materials in   Civil Engineering  | 
256  | 
Quantitative Analysis of   Reaction Degrees and Factors Influencing Alkali-activated Metakaolin-GGBFS   Blend  | 
2022  | 
Construction and Building   Materials  | 
257  | 
“三高四新”背景下土木工程专业《材料力学》教学改革探索  | 
2022  | 
创新创业理论研究与实践  | 
258  | 
“课程思政”背景下《工程力学》教学大纲编写探究  | 
2022  | 
当代教育实践与教学研究  | 
259  | 
等效荷载法在预应力锚栓式风电机组基础中的应用研究  | 
2022  | 
风能  | 
260  | 
基于基础环动态偏移量的风电机组基础损伤状态评价研究  | 
2022  | 
风能  | 
261  | 
卓越土木工程师实践教学体系构建分析  | 
2022  | 
甘肃教育研究  | 
262  | 
扩容风机基础承载力提升方案的研究  | 
2022  | 
工程建设  | 
263  | 
基于优化参数的变分模态分解结构损伤识别  | 
2022  | 
工程建设  | 
264  | 
一种基于谱加速度均值的新型地震动强度指标的提出及应用  | 
2022  | 
工程建设  | 
265  | 
基于跨阈持时的结构疲劳可靠性分析  | 
2022  | 
工程建设  | 
266  | 
复合齿槽环筋扣合锚接预制剪力墙数值模拟  | 
2022  | 
广东土木与建筑  | 
267  | 
土-结构相互作用下基础环式风机基础受力特性研究  | 
2022  | 
河南科技  | 
268  | 
湖南地区装配式混凝土外挂墙板接缝宽度研究  | 
2022  | 
湖南城市学院学报(自然科学版)  | 
269  | 
山区悬索桥钢主梁施工新工艺研究与应用  | 
2022  | 
湖南交通科技  | 
270  | 
钢筋混凝土通电锈蚀效率试验研究  | 
2022  | 
混凝土世界  | 
271  | 
混凝土轻质墙板上墙含水率对干燥收缩影响的试验研究  | 
2022  | 
混凝土与水泥制品  | 
272  | 
基于新工科视域下土木工程专业本科生课程改革与实践  | 
2021  | 
教育科学  | 
273  | 
“三高四新”战略下工科专业基础课教学改革探索——以《理论力学》为例  | 
2022  | 
教育科学  | 
274  | 
振动力学课程理论与案例交互式教学方法探索与实践  | 
2022  | 
教育科学  | 
275  | 
“一带一路”背景下钢结构基本原理教学探讨  | 
2021  | 
科技创新导报  | 
276  | 
基于OBE理念的课程考试改革实践—以“建设项目策划与管理”课程为例  | 
2022  | 
科技风  | 
277  | 
“新工科”背景下留学生“桥梁工程”课程全英文教学探索  | 
2022  | 
科技风  | 
278  | 
Simpack软件平台在车-桥耦合系统虚拟仿真实验教学中的探索与应用  | 
2022  | 
科技新时代  | 
279  | 
课程思政视角下“理论力学”教学大纲编写探究  | 
2022  | 
科教导刊  | 
280  | 
风机基础最大倾斜动态监测方法  | 
2022  | 
能源与节能  | 
281  | 
拉顶管施工技术在排水管网工程中的应用  | 
2022  | 
山西建筑  | 
282  | 
开洞剪力墙在不同受火面下温度场数值模拟分析  | 
2022  | 
山西建筑  | 
283  | 
谈高温后混凝土耐久性影响因素及试验方法  | 
2022  | 
山西建筑  | 
284  | 
深埋隧道台阶法施工围岩压力拱的变化规律  | 
2022  | 
土木工程  | 
285  | 
新国际化趋势下留学生桥梁施工课程教学改革与实践  | 
2022  | 
新教育时代  | 
286  | 
基于应用型人才教育的BIM技术基础理论课程教学改革探索  | 
2021  | 
新时代教育  | 
287  | 
基于风洞实验室和CFD数值风洞平台的创新实践人才培养模式研究  | 
2022  | 
中国应急管理科学  | 
288  | 
大跨度悬挑景观桥人致振动及控制研究  | 
2022  | 
重庆建筑  | 
289  | 
阻尼振动检测套筒连接灌浆饱满度试验研究  | 
2022  | 
重庆建筑  | 
290  | 
镀锌钢绞线柔性腹杆结构在输电塔中的应用研究  | 
2022  | 
重庆建筑  | 
291  | 
后开洞自复位剪力墙及加固力学性能模拟分析  | 
2022  | 
重庆建筑  | 
292  | 
双连梁联肢框架剪力墙的抗震性能分析  | 
2022  | 
重庆建筑  | 
293  | 
防屈曲钢板剪力墙在火灾条件下的温度场分析  | 
2022  | 
重庆建筑  | 
294  | 
墙体弹性模量对不均匀沉降和墙面应力的影响  | 
2022  | 
重庆建筑  | 
295  | 
剪压复合作用下块体-砂浆界面力学性能试验研究  | 
2022  | 
重庆建筑  | 
296  | 
钢筋锈胀下混凝土抗压强度退化试验研究  | 
2022  | 
重庆建筑  | 
297  | 
浅谈高等教育中的价值理性和工具理性  | 
2022  | 
高等教育研究  | 
298  | 
Fatigue Performance of Steel–UHPC Composite Bridge Deck System with Large Longitudinal Rib  | 
2022  | 
Advances in Materials Science and Engineering  | 
299  | 
Determination of the Target   Reliability Index of the Concrete Main Girder of Long-Span Structures Based   on Structural Design Service Life  | 
  | 
Buildings  |